Ок. Спробую. Дякую за допомогу. Але, будь ласка, поясни, що це стрічка робить ? І навіщо там дописувати це ? І взагалі, звідки ти знаєщ, що треба там писати. Я теж хочу знати ! =)
checking for cards to compile driver for... allchecking for additonal options to compile driver for... allconfigure: creating ./config.statusconfig.status: creating versionconfig.status: creating Makefile.confconfig.status: WARNING: Makefile.conf.in seems to ignore the --datarootdir settingconfig.status: creating snddevicesconfig.status: creating utils/alsa-driver.specconfig.status: creating utils/buildrpmconfig.status: creating toplevel.configconfig.status: creating utils/alsasoundconfig.status: creating utils/alsasound.posixconfig.status: creating include/pci_ids_compat.hconfig.status: creating include/i2c-id_compat.hconfig.status: creating include/config.hconfig.status: include/config.h is unchangedconfig.status: creating include/config1.hconfig.status: include/config1.h is unchangedconfig.status: creating include/version.hconfig.status: include/version.h is unchangedconfig.status: creating include/autoconf-extra.hconfig.status: include/autoconf-extra.h is unchangedHacking autoconf.h...
No sound from Headphones If you have an Intel sound card which requires snd-hda-intel driver but do not have any sound when plugging in headphones, you are in the correct section. YaST2 should have created the /etc/modprobe.d/sound file and it should contain the following (or something very similar): options snd slots=snd-hda-intel# u1Nb.Iok8MET6hsF:82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controlleralias snd-card-0 snd-hda-intelThe driver problem occurs with every distribution so it is normal. Anyways, you are going to have to modify the options line. The new file should look like the following (lines staring with a pound sign # are comments): options snd-hda-intel model=z71v position_fix=1# u1Nb.Iok8MET6hsF:82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controlleralias snd-card-0 snd-hda-intelThat should do the trick. Now go to the "Restarting the sound server" section below. If after restarting the sound you still don't have any output from your headphones, make sure you un-muted the headphones using alsamixer (in command line) or your favorite graphical mixer (such as KMix). Note! On Sony Vaio FZ21M, you have to insert the following options: options snd-hda-intel model=vaio enable=1 index=0 position_fix=1
Я так розумію, що поломаний файл autoconf.h, і що то значить ? Як виправити цю проблему ?